Jump to content

Made an Oni Mask... Thoughts


xKiLlFrEnZyx

Recommended Posts

So ive been messing around with my 3D printer and decided to work on a little project making an Oni mask!

Here it is, its almost finished just have to do a few touchups with paint and put a clearcoat over the top attach some straps and it should be good to go!

 

20180709_183637.jpg20180709_183631.jpg20180709_183657.jpg20180709_183706.jpg

Also, i recently got an airbrush and trying to learn the art of using it... still have a lot to learn but i feel im slowly getting there  :lol:

Spoiler

Some pre painted shots

20180620_170312.thumb.jpg.7e5a06f0787ded1fe7afdbda1edb5a46.jpg 20180620_170329.thumb.jpg.e74f42bd87747d8fd60c523824b701e6.jpg 20180620_170416.thumb.jpg.897314d9dbb1cae1039785cfb9ac4b3b.jpg

1

What are your thoughts/criticisms..... would like to hear what you guys have to say

Link to comment
Share on other sites

So ive been messing around with my 3D printer and decided to work on a little project making an Oni mask!
Here it is, its almost finished just have to do a few touchups with paint and put a clearcoat over the top attach some straps and it should be good to go!
 
20180709_183637.jpg20180709_183631.jpg20180709_183657.jpg20180709_183706.jpg
Also, i recently got an airbrush and trying to learn the art of using it... still have a lot to learn but i feel im slowly getting there  :lol:
Spoiler Some pre painted shots
20180620_170312.thumb.jpg.7e5a06f0787ded1fe7afdbda1edb5a46.jpg 20180620_170329.thumb.jpg.e74f42bd87747d8fd60c523824b701e6.jpg 20180620_170416.thumb.jpg.897314d9dbb1cae1039785cfb9ac4b3b.jpg
1 What are your thoughts/criticisms..... would like to hear what you guys have to say

Nicely printed, getting a successful print from a part that big is not easy. Do you consider spraying some base coat and do some polish to hide the lines? I never used a spray gun before, will definitely pick it up in the future. Looking forward to see your feedback tho : )


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


Nicely printed, getting a successful print from a part that big is not easy. Do you consider spraying some base coat and do some polish to hide the lines? I never used a spray gun before, will definitely pick it up in the future. Looking forward to see your feedback tho : )


Sent from my iPhone using Tapatalk

Oh wow, I was unable to load those painted photos on the street. The finished paint looks sick... make me wanna buy a spray gun right now [emoji2]


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

@JosephW It was a 3 part print (4 technically) there is a join just under the eyes where the mask was cut in 1/2, otherwise it was just a bit too tall...then the horns were printed separately as well and glued on after... to prep the piece i sanded -> filled -> primed  maybe 2-3 times then did a few layers of more primer and that got it as smooth as i could get it in a reasonable amount of time

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...