Jump to content
  1. Judah Warrior

    Judah Warrior

  2. Donut

    Donut

  3. Grisha

    Grisha

  • Similar Content

    • By Danakar Endeel
      THIS SET WAS SOLD AND IS NO LONGER AVAILABLE!
       
      Hey there guys
      As I recently purchased a pair of Virpil Constellation Alphas I realized I still have a unused set of CH gear that I won't be needing anymore. So if any of you are still looking for a set of CH gear at a nice discount let me know!
      CH may not look all fancy like other HOTAS out there but their sticks are industrial grade, built to last almost indefinitely, and practically indestructible. I bought them back in 2014 because of that while building my basic simpit with my dad but I've never actually used them yet (except for sitting in the chair at times and making pew-pew sounds).
      https://robertsspaceindustries.com/spectrum/community/SC/forum/50264/thread/a-boyhood-dream-becoming-reality-after-24-years-i-  

      The original boxes are also still be available and my dad made longer (27cm) aluminium extender panels for the footrests back then to sit on top of the original shorter ones with adhesive tape because the original length of those pedals was rather short. 
      Regarding shipping, I'm from the Netherlands so this may be something to keep in mind regarding shipping costs+fees.
      As far I remember the set cost me around €475 at the time and they appear to be getting rather hard to find these days so I would like to get at least €300 +shipping for the set.
       
      Send me a PM if you're interested and I'm sure we can work something out!! Figured I'd let my org-mates be able to get them first instead of putting them up for sale on Ebay. 
       
    • By Buckarooh
      Sorry for the noise, just starting out, trawled the interwebs without success.
      Can someone please direct to youtube demo, or advise within CH Control Manager on setting up CH fighterstick and Ch Pro throttle (WITHOUT pedals)? All demo's use pedals. Problems:
      1. Can't get Pro Throttle slider to act as throttle. Always reads as an axis (roll) and ship spins. Have setup both devices to be read as single widows 'joystick 1'.
      2. Have set the throttle 'POV HAT' as 'CM device 2', disabled DX mode and entered keyboards keys for straffing, but not being read.
      Thanks in advance.
       
    • By Maj_Kryme
      Opted to sell via other means. Ty for your interest.  Mods, please feel free to delete.
    • By RuneStar
      I have a bnib Cobra M5 and a used one along with a Pro Throttle if anyone is interested. 
      Not sure what I want for them,  so shoot me some offers.  You can email me at jncrymal@hotmail.com.  Also you check jncrymal on ebay for seller feedback.  Not using Ebay anymore.  I can no longer use a joystick due to an injury so these are collecting dust and I'm stuck with a mouse and keyboard.  I'm located in Columbia, SC if anyone is close and wants to take a look.
      Accepting only Paypal.
       
    • By thekalman
      Hey guys,
      Some of you may have seen my 'Star Citizen CH HOTAS' tutorials. I did the last one about a year ago for AC 1.1, well before 2.0 released, so it's quite out of date.
      I've had some requests to do an updated one. Thought before I started working on it I'd see if there was anything you guys wanted to see in it. 
      Things I want to cover:
      Setting up a full CH HOTAS for Star Citizen. Using the CH Control Manager in a combination of DX and Mapped mode to assign commands. Primarily using the CM to assign commands -I do very little within Star Citizen itself. Setting up using translation on the ministick -or- roll for those that don't have pedals (might look at doing a mode swap as well, so you can have both on the ministick). Currently looking into using the ministick for WSAD movement in FPS so you can use your throttle and a mouse and get rid of the keyboard. This will involve programming two separate modes for the HOTAS -a Flight Mode and an FPS mode. If anyone has any suggestions for things they want to see let me know.
×
×
  • Create New...